INCH-POUND
MIL-S-64052
29 April 1988
SPRAY GUN, PAINT, HEAVY DUTY PRESSURE FEED
This specification is approved for use by all Departments and Agencies of the
Department of Defense.
1.
Scope
1.1 Scope. This specification covers Pressure Feed, Heavy Duty, Paint Spray Gun
assemblies, including the gun, cup, gages, regulator and valves, here after referred
to as spray gun.
2.
APPLICABLE DOCUMENTS
2.1 Government documents
2.1.1 Specifications and standards. The following specifications and standards
form a part of this specification to the extent specified herein. Unless otherwise
specified, the issue of these documents shall be those listed in the issue of
the Department of Defense Index of Specifications and Standards (DoDISS) and
supplement thereto, cited in the solicitation.
SPECIFICATIONS
FEDERAL
TT-E-489
Enamel, Alkyd, Gloss (For Exterior and Interior Surfaces)
PPP-B-601
-
Boxes, Wood, Cleated-Plywood
PPP-B-621
-
Boxes, Wood, Nailed and Lock-Corner
PPP-B-636
BOX, Shipping, Fiberboard
-
-
Fiberboard: Corrugated and Solid, Sheet Stock (Container
PPP-F-320
Grade) and Cut Shapes
PPP-T-76
Tape, Packaging Paper (For Carton Sealing)
MILITARY
- Primer Coatings: Epoxy-Polymide Chemical and Solvent
MIL-P-23377
Resistant
MIL-C-46168
- Coating, Aliphatic Polyurethane, Chemical Agent
Resistant
AMSC N/A
FSC 4940
DISTRIBUTION STATEMENT A.
Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business