A-A-273 - Leak Detector, Refrigerant Gas (Industrial)
A-A-50219 - Wheel, Lathe Railway, Dual End Drive
This Commercial Item Description covers the requirements for wheel lathe for profiling the treads of mounted wheel sets with or without mounted roller bearings, traction motors and gears.
A-A-50220 - Lathe, Axle, Journal Truing Railway, Dual Or Single End Drive
This commercial item description covers the requirements for a manually operated journal-truing axle lathe for remachining bare axles and the journals of mounted wheel sets.
A-A-50310 - Spray Gun, Paint, Heavy Duty (Siphon Or Pressure Feed)
This commercial item description (CID) covers the general requirements for two types (siphon and pressure feed) of air operated, heavy-duty paint spray guns consisting of forged aluminum bodies, paint cups, and carrying cases. Spray guns covered by this CID are intended for commercial/industrial applications.
A-A-50501 - Auger Machines, Pipe And Sewer Cleaner: Gasoline-Engine-Driven, Trailer Mounted
This Commercial Item Description (CID) covers three sizes of gasoline-engine-driver, trailer mounted auger machines using sectional rods for unclogging and cleaning of pipes and sewers.
A-A-50743 - Cleaner, Ultrasonic, With Rinse And Dry, 5.5 Gallon
This commercial item description covers a cabinet type ultrasonic cleaner having washing, rinsing and drying capacity. The cleaning tank shall have a heater.
A-A-50744 - Cleaner, Ultrasonic, Nine Gallon Capacity, Aerospace Maintenance
This Commercial Item Description covers a nine gallon nominal capacity ultrasonic cleaner for general purpose aerospace cleaning.
A-A-52519 - Scrappers (Pigs), Pipeline: Cleaning And Batching (Metric)
This CID covers requirements for fluid-propelled cleaning and batching scrapers, hereinafter called ┬┐pigs┬┐, for all hydrocarbon pipelines. Cleaning pigs shall be capable of cleaning internal pipe deposits such as wax, paraffin, sludge, mud, and calcium. Batching pigs shall be capable of separating dissimilar fluids such as gasoline, kerosene or diesel and emptying pipelines. Pigs shall be available for 101.6 millimeter (mm) (4-inch), 152,4 mm (6-inch), 203.2 mm (8-inch), and 304.8 mm (12-inch) nominal size pipelines.
A-A-58011 - Cleaner, Ultrasonic, Six Gallon
This Commercial product description covers a six gallon nominal capacity ultrasonic cleaner with a variable temperature heater suitable for branch mounting.
A-A-58017 - Recovery Unit, Anti-Freeze
This Commercial Item Description (CID) describes an anti-freeze recovery system which recycles engine coolants by filtration and deionization.
A-A-58018 - Recovery Unit, Anti-Freeze
This Commercial Item Description (CID) describes an anti-freeze recovery system which recycles engine coolants by distillation.
GGG-A-825 - Auger Machine, Pipe And Sewer, Power Operated
GGG-C-00420 - Cleaner, Pipeline, Air Pressure, And Cleaning Kit, Pipeline, Air Pressure Accessories (Use Mil-C-18457)
GGG-G-770 - Gun, Air Blow, (Blast Cleaning) (S/S By A-A-55543)
GGG-G-770 - Gun, Air Blow, (Blast Cleaning) (S/S By A-A-55543)
GGG-L-00150 - Lead Detector, Refrigerant Gas (Kit)
MIL-A-28672 - Auger Machines, Pipe And Sewer Cleaner: Gasoline-Engine-Driven, Trailer Mounted (S/S By A-A-50501)
The auger machine shall be of the following sizes: Size 500 - Minimum capacity of 500 feet, Size 800 - Minimum capacity of 800 feet and Size 1000 - Minimum capacity of 1,000 feet.
MIL-B-14563 - Booth, Spraying, Dry (Bench Type With Legs)
This specification covers one self supported, dry (not water wash), bench type spray booth incorporating an exhaust unit. The booth is for confining and directing dust, fumes, and overspray when spraying paint or preservatives on parts.
MIL-B-18561 - Blast Cleaning Machine (Use Mil-B-45022)
MIL-B-28512 - Booth, Spraying, Paint (For 55-Gallon Drums)
MIL-B-28514 - Booth, Spraying, Paint (With Exhaust System)
This specification covers one type of dry baffle, floor-type paint spraying booth with exhaust system.
MIL-B-28524 - Buffing Machine (Floor Mounted, Electric)
This specification covers a floor-mounted, single spindle, buffing machineequipped with separate dust hoods for cleaning 5-gallon gasoline cans in drum- and can-reconditioning plants.
MIL-B-3181 - Blasting Room, Dry, Knock-Down
MIL-B-45022 - Blast Cleaning Cabinets
MIL-B-45081 - Blast Cleaning Machine: Self-Contained Tumble Type, With Dust Collector
This specification covers a self-contained tumble type blast cleaning machine, including dust collector, in which the abrasive is directed by centrifugal force onto the objects being cleaned.
MIL-B-4610 - Balancers, Portable Tool
MIL-B-81993 - Booth, Spraying, Paint, Floor Type (With Top Exhaust System
This specification covers the requirements for floor type (with top exhaust system) paint spraying booths.
MIL-B-83785 - Brush, Power Driven
MIL-C-0024196 - Cleaning System, Ultrasonic
This specification covers ultrasonic cleaning systems.
MIL-C-11071 - Cleaning Machine, Fuel Can, Drum
This specification covers a gasoline engine driven, portable cleaning machine used for removing contamination from the interior of 5 gallon cans and 55 gallon drums.
MIL-C-12786 - Cleaner, Pressure, Water
This specification covers one type and size of stationary, electric motor driven pressure cleaner, equipped with a pressure pump, hoses, and manually operated nozzles, for cleaning motor vehicles.
MIL-C-13663 - Cylinder And Cylinder Sleeve Reconditioning, Internal-Combustion Engine (Reclaiming With Electro-Deposited Porous-Chromium Plating)
MIL-C-14076 - Cleaning Element, Pipeline Fluid Pressure Brush Type (S/S By A-A-52519)
This specification covers a fluid-propelled, rubber-cup, self-adjusting wire-brush pipeline cleaner used in cleaning the interior of pipe conforming to MIL-T-425.
MIL-C-15061 - Cleaning Machine, Blast, Liquid-Air-Grit (Use Mil-B-45022) 150360
MIL-C-16435 - Conditioning Machines, Paint (Use Mil-M-3070)
MIL-C-16452 - Chair, Aerial, Cable
MIL-C-18457 - Cleaner, Pipeline, Air Pressure, And Cleaning Kits, Pipeline, Air Pressure
MIL-C-18868 - Cleaning Gum, Water Pressure Jet
MIL-C-21074 - Cleaner, Steam, Pressure Jet (Navy)
MIL-C-22894 - Cleaner, Steam, Pressure Jet, Wheel-Mounted
This specification covers two sizes of electric-motor-driven wheel-mounted, oil-fired, pressure jet, steam cleaners. The cleaners combine solution that is ejected at a minimum of 100 gallons per hour (gph) and 180 gph.
MIL-C-23023 - Cleaner, Steam, Pressure Jet, Trailer Mounted
MIL-C-23848 - Cleaning Machine, Cold Solvent, Jet Type (Use Mil-C-24434)
MIL-C-23852 - Cleaning Machine, Steam, High Pressure Electrically Powered
MIL-C-24196 - Cleaning System, Ultrasonic
This specification covers ultrasonic cleaning systems. The systems are electrically powered with equipment and accessories as specified herein.
MIL-C-24434 - Cleaner, Ultrasonic, Teletype Machines
MIL-C-28507 - Chainer, Automatic Feed (For 55-Gallon Drums)
MIL-C-28509 - Chime Resealer, Automatic (For 55-Gallon Drums)(No S/S Document)
MIL-C-28597 - Cleaner, Water Blast, High Pressure, Trailer-Mounted, Ded
This specification covers a high pressure, trailer mounted, diesel-engine-powered, water blast unit.
MIL-C-28605 - Cleaner, Jet Spray
MIL-C-28609 - Cleaner, Steam, Pressure Jet (With High-Pressure, Hydraulic Wash)
MIL-C-28998 - Cleaner-Dryer. Electronic Test Instrument, Portable
This specification establishes requirements for one type of electronic test instrument cleaner-dryer, complete with external controls, lamps, spray system and air compressor, utilizing water and a liquid detergent cleaning compound in the cleaning process.
MIL-C-29168 - Cleaning System, Pressure, Water (For Oil Containment Booms)
MIL-C-29222 - Cleaner, Pressure, Hot-Water, Skid-Mounted (S/S By Xx-C-2866)
This specification covers a portable, skid-mounted, electric, oil fired, hot water pressure cleaner, with a minimum output capacity of 200 gallons per hour (gph) at a minimum 1,000 pounds per square inch gage (psig) operating pressure.
MIL-C-4035 - Cleaner, Steam Pressure Jet, Wheel-Mounted, Electrically Operated, Type B-3 (Use Mil-C-22894)
MIL-C-4036 - Cleaner, Vapor Pressure, Spray Rinse
This specification covers a portable combination vapor- and high- pressure rinse, gasoline-engine-operated cleaner.
MIL-C-45003 - Cleaner, Steam, Pressure Jet, Diesel Fuel Fired, Skid Mounted
This specification covers a skid mounted, electric motor driven, diesel fuel fired, pressure jet steam cleaner and pressure washer. The cleaner specified is the continuous coil type, with no space for steam accumulation, in which water is heated to a temperature below the saturation temperature for the pressure in the coil and is discharged from the nozzle at high velocity. The cleaner should discharge no less than 600 gallons per hour (gph) of saturated steam at a pressure of no less than 200 pounds per square inch gage (psig) and no less than 500 gph of hot and cold water at a pressure of no less than 400 psig.
MIL-C-45596 - Cleaning System, Sonic Energy
This specification covers a sonic energy cleaning system incorporating cleaning, rinsing, and drying facilities for use with aqueous detergent solutions.
MIL-C-45960 - Cleaner, Steam, Pressure Jet, Skid Mounted
MIL-C-45996 - Cleaner, Steam And High Pressure Hot And Cold Water Jet, Trailer Mounted
This specification covers a steam cleaner, electric motor driven, diesel fuel fired with steam, hot water and cold water cleaning capabilities.
MIL-C-8112 - Cleaner, Spray, Gasoline Engine Driven, Trailer Mounted, Type Ma-1
MIL-C-81389 - Cleaner, Steam, Pressure Jet, Wheel Mounted, Electrically Operated, Oil Fired
MIL-C-81762 - Cleaner, Pressure, Cleaning Compound Water, Foaming
MIL-C-81825 - Cleaning Machine, Small Aircraft, Mobile
This specification covers one type of mobile (tractor towed) air-craft cleaning machine for use in removing salt deposits, oil, grease and other contaminants from aircraft surfaces. (See 6.1.)
MIL-C-82033 - Cleaner, Steam Or Hot Water Pressure Jet Trailer-Mounted (For Bomb Disposal Operations)(S/S By Xx-C-2867)
This specification covers trailer-mounted, gasoline engine powered, oil-fired, 180 gallons per hour (gph), steam or hot water pressure cleaners equipped with nonsparking cleaning guns.
MIL-C-83754 - Cleaner, Ultrasonic, Cabinet, Type, With Casters
MIL-C-83761 - Cleaner, Pressure, Solvent-Water
MIL-C-9911 - Cleaner, Steam, Pressure Jet, Skid Mounted
MIL-C-9940 - Control, Auxiliary Hoist
This specification covers auxiliary crane and hoist control units for direct and remote control, precision raising and lowering equipment.
MIL-D-12491 - Degreaser: Solvent, Tank Immersion-Type
This specification covers tank-immersion, cold solvent degreaser with a safety cover and circulating solution filter.
MIL-D-14247 - Degreaser, Tank, Heated, Water Or Alkaline, With Agitator
MIL-D-15009 - Degreaser, Vapor And Solvent, Tank Immersion (Use Mil-D-26847)
MIL-D-19771 - Degreaser
MIL-D-23786 - Dereeler With Tension Device
MIL-D-26847 - Degreaser, Vapor Type, Stationary Spray Attachment, Steam Or Electrically Heated
MIL-D-28503 - Degreaser, Ultrasonic, With Vapor Rinse
MIL-D-45064 - Degreaser, Portable, Solvent Type, Tank Immersion
This specification covers a portable, solvent type degreaser capable of cleaning parts and objects by fine spraying, heavy spraying, full volume flow or minimal flow washing, or by immersion.
MIL-D-45099 - Degreasers, Stationary, High Velocity, Centrifugal Impact Type, Oil Fired
This specification covers centrifugal, impact-type degreasers using hot alkali or cold petroleum solvents as the cleaning solution.
MIL-D-45145 - Degreaser, Vapor-Spray, Stationary, Solvent Type, Steam Or Electrically Heated (S/S By Mil-D-26847)
MIL-D-45161 - Degreaser, Portable, Vapor Type, Electrically Heated (For Small Parts)
MIL-D-45839 - Degreaser, Stationary, Liquid Type
MIL-D-45950 - Degreaser, Vapor Spray, Stationary, Solvent-Type, Steam Or Electrically-Heated
This specification covers hand-operated, electrically or steam-heated degreasers for use with hydrocarbon type solvents for the removal of dirt, grease, oil, and sludge from metal and other surfaces.
MIL-DTL-45859 - Pop-Valve-Test Bench Assembly
This specification covers a pneumatic pop-valve-test bench assembly for testing air-compressor components at pressures up to 6000 pounds per square inch gage (psig).
MIL-E-17345 - Evacuator, Insulation Space, Liquid Oxygen Storage Tank (Use Mil-S-23639)
MIL-E-18639 - Enclosure, Electromagnetic, Shielding, Knockdown Design
MIL-E-28932 - Electronic Shop, Transportable Expandable, Test Instrument Facility
MIL-E-28968 - Electronic Shop, Transportable, Expandable, Equipment Repair Facility
MIL-E-28980 - Electronic Shop, Transportable, An/Grm-94
MIL-E-4957 - Enclosure, Electromagnetic Shielding Demountable, Prefabricated For Electronics Test Purposes
MIL-E-82135 - Electronic Shop, Transportable, An/Grm-86
MIL-E-82153 - Electronic Shops, Transportable (Use Mil-E-28980)
MIL-E-8881 - ( Images) Enclosure, Electromagnetic Shielding Demountable, Prefabricated General Specification For
This specification covers shielding enclosures which provide specified degrees of attenuation of electromagnetic fields from 100 kilocycles (kc) to 20,000 megacycles (mc) for the purpose of test ad alignment of electronic equipments and other related purposes.
MIL-E-9695 - Electronic Shop, Trailer Mounted An/Mrm-3( )
MIL-F-19204 - Frequency Converter Group, An/Usa-6
MIL-F-23844 - Former, Insulation (Hand Operated)
MIL-F-28505 - Flush, Rinse, And Steaming Machine (For 55-Gallon Drums)
MIL-F-28518 - Flush And Steam Rinse Machine (For 5-Gallon Cans)
MIL-G-14611 - Grinding Machine, Stationary, Locomotive And Car Wheel Tread, Flange, Journal And Crank Pintruing, Wheel Diameter 28 Inches Through 66 Inches, Gages 36 Inches Through 66 Inches
MIL-G-22926 - Generator, Signal An/Urm-129(*)
MIL-H-13878 - Honing, Horizontal
MIL-H-16711 - Hose Assembly, Plastic Paint Spraying, Electric-Heating
MIL-H-19291 - Head, Group Coil Winding, Heavy Duty, Shore And Shipboard
MIL-H-23781 - Holder, Illuminated, Printed Circuit Board
MIL-H-24134 - Heater, Bolt, Electric, For Bolts And Studs (Controlled Distribution)
MIL-H-45193 - Heater, Gun Type, Electric (S/S By A-A-59435)
This specification covers one type and three sizes of portable, manually operated, hand held, electric heater gun used to supply a steady flow of air and heated air.
MIL-H-52112 - Heating Torches, Equipment Winterization, Instant Lighting
This specification covers a 50,000 Btu/hr gasoline-burning heating torch to ease the starting of internal combustion engines in ambient temperatures from plus 40 deg. F to minus 65 deg. F.
MIL-H-81324 - Honing Machine, Dry, Portable
This specification covers one type of dry honing machine capable of removing corrosion products from aircraft and aircraft components.
MIL-H-9957 - Heater, Infrared, Portable
MIL-K-11509 - Kit, Cable Repair, With Vulcanizer
MIL-K-81786 - Kit, Maintenance, Electrical-Electronic, Cable And Cable Harness
This specification covers an electrical-electronic maintenance kit containing consumable components, tools and equipment designed for use by shore based and shipboard personnel, to maintain, modify and repair electronic cables and cable harnesses.
MIL-K-81786/1 - Tubing, Plastic, Heat Shrinkable, Electrically Insulating, Polyolefin, Dual Wall, Semi-Rigid: Shrink Ratio 3 To 1
MIL-K-81786/10 - Cap, Electrically Insulating, Polydelfin, Meltable Inner Wall, Heat Shrinkable
MIL-K-81786/11 - Kit, Adhesive, Epoxy, Flexible
MIL-K-81786/2 - Tubing, Plastic, Heat Shrinkable, Electrically Insulating Irradiated Poly (Vinylidene Fluoride), Semi Rigid: Shrink Ratio 2 To 1
MIL-K-81786/3 - Kit Tubing, Plastic, Heat Shrinkable (Low Recovery Temperature), Electrically, Electrically Insulating, Flexible, Flame Retarded, Irradiated Polyolefin; Shrink Ratio 2 To 1
MIL-K-81786/4 - Kit, Tubing, Elastomeric, Rubber, Electrically Insulating, Abrasion Resistant, Polychloroprene, Flexible, Heat Shrinkable, Shrink Ratio 1.75 To 1
MIL-K-81786/5 - Kit, Tubing, Plastic, Irradiated Polyolefin, Flexible Electrical Insulation, Heat Shrinkable, Shrink Ratio 4 To 1
MIL-K-81786/6 - Components, Molded, Polyolefin, Electrically Insulating, Strain Relieving, Non Burning, Semi-Rigid, Heat Shrinkable
MIL-K-81786/7 - Sleeve, Termination, Electrical, Low Temperature, Fluxed Solder Perform, Heat Shrinkable
MIL-K-81786/8 - Sleeve, Termination, Electrical, Fluxed Solder Perform, Environment Resistant, Heat Shrinkable
MIL-K-81786/9 - Sleeve, Sealing, Crimp Slice, Transparent, Heat Shrinkable, High Temperature Altitude Immersion Seal
MIL-L-14576 - Lathe, Armature And Undercutter (S/S By A-A-55525)
This specification covers one type of bench mounted lathe designed for use in commutator turning and mica undercutting of automotive generator and starter motor armatures.
MIL-L-28510 - Leak Detector (For 55-Gallon Drums)
MIL-L-3516 - Leak Detector, Refrigerant Gas, Acetylene Burning, With Search Hose (For Noncombustible Refrigerants)
This specification covers one type acetylene-burning leak detector for use with noncombustible halide refrigerating systems.
MIL-M-12971 - Mechanism, Valve Replacement, M1
MIL-M-13422 - Maintenance And Repair Set, Chemical Corps Equipment, M1A1
MIL-M-1944 - Machines, Armature-And-Stator-Coil-Winding,, Motor-Driven (Naval Shipboard Use)
MIL-M-2771 - Machines, Armature-Banding And Communtator-Conditioning, Motor-Driven
MIL-M-3070 - Mixers, Liquid, Revolving Shaft And Agitator Types (S/S By A-A-59433)
MIL-M-52801 - Mixer, Photographic Chemicals, Motor Driven
MIL-M-87973 - Maintenance Platform Self-Propelled, Boom, Lift, 40, 60 And 80 Foot
This specification covers three sizes of one kind of commercial, self-propelled, multi-position, aerial work platform which will be called the unit.
MIL-P-10708 - Packaging Of Spare Parts And Accessories For Mechanism, Valve Replacement, M1.
MIL-P-11934 - Press, Track Pin And Bushing, Hydraulic, Wheel-Mounted, Gasoline-Engine-Driven
MIL-P-28504 - Preflushing Machine (For 55-Gallon Drums)
MIL-P-28511 - Preheater, Paint Spray Booth (For 55-Gallon Drums)
MIL-P-45045 - Press, Railway Wheel, Hydraulic, 600 Ton Capacity
MIL-P-45051 - Press, Connecting Rod Straightening, Hydraulic
This specification covers a 12.5 ton, manually operated, bench mounted, hydraulic press for straightening connecting rods of internal combustion engines.
MIL-P-9951 - Pressurizing Kit, Telephone Cable
MIL-PRF-83756 - Blast Cleaning Machines
This specification covers 2 types of dry blast cleaning machines for surface cleaning, surface conditioning and peening of ferrous and nonferrous metals using a blasting media.
MIL-PRF-83831 - Booth, Cleaning, Water Base Solvent Spray-Electronic Measuring Instruments
This specification covers one type of floor mounted, manually operated, nonrecirculating water base solvent spray booth for the cleaning of electronic measuring instruments.
MIL-PRF-87893 - Workstation, Electrostatic Discharge (Esd) Control
This specification covers electrical and construction requirements for ESD control workstations and components for use in applications where the protection of ESD sensitive (ESDS) items is required. ESDS items are defined and classified in MIL-STD-1686 (see 6.1.2).
MIL-R-23845 - Resurfacer, Commutator, Grinder Computator, (Use Mil-R-3907)
MIL-R-2834 - Reseating, Outfits, Valve (Globe, Angle, And Cross), Steam.
MIL-R-3907 - Resurfacer, Commutator
MIL-R-45567 - Repair Kit, Hose Assembly
MIL-S-12877 - Spray Gun, Paint, (Heavy Duty, Siphon Feed) (S/S By A-A-50310)
MIL-S-12928 - Separators, Oil And Water, Compressed Air (S/S By A-A-59436)
MIL-S-14560 - Spray Outfit, Paint; For Use With Strippable Compound
This specification covers one type of spray outfit capable of agitating, force feeding (see 3.2), and spraying strippable compound.
MIL-S-14617 - Spray Gun, Paint, Touch-Up (S/S By Mil-S-64052 Or Mil-S-12877)
This specification covers one type of air-operated, touch-up paint spray gun.
MIL-S-14623 - Spray Gun, Paint, Light Duty (S/S By Mil-S-64052)
This specification covers one pressure feed type of air-operated, light duty, paint spray gun.
MIL-S-15297 - Spray Outfits, Paint, Portable (S/S By Oo-S-2927)
This specification covers two types of portable paint spray outfits.
MIL-S-15847 - Spray Gun And Accessories, Paint And Dope, Aircraft Use
MIL-S-17306 - Stand, Maintenance, Armature
MIL-S-18643 - Spray Outfit, Paint-Gasoline Engine Driven-Hand Truck Mounted (Trailer And Wheelbarrow Types)
MIL-S-2020 - Spreader, Coil, Armature And Stator
MIL-S-22805 - Spray Kit, Self Pressurized (S/S By Sae-As22805)
MIL-S-23572 - Servicing Platforms, Truck- And Tractor-Mounted (S/S By Mil-T-45398, 62035 And 62142)
MIL-S-23596 - Spray Outfits, Paint, Airless Cold And Hot Spray, Portable, Non-Electric
MIL-S-24530 - Silver Recovery Units, Electrolytic
MIL-S-28506 - Siphon Unit (For 55-Gallon Drums)
MIL-S-28508 - Stripper-Buffing Machine, Automatic (For 55-Gallon Drums)
MIL-S-3050 - Spray Outfit, Paint, Bituminous Emulsion, Trailor Mounted, With Compressor & Gasoline Engine
This specification covers a complete trailer-mounted spray outfit for spraying bituminous emulsions and other liquids from a standard 55-gallon shipping drum.
MIL-S-3288 - Stand, Maintenance, Armature
MIL-S-45143 - Spray Outfit, Rubber Cement
MIL-S-4543 - Shop, Paint, Motor Vehicle, Field
MIL-S-45537 - Shop Equipment, Organizational Repair Truck-Mounted
MIL-S-45538 - Shop Equipment, General-Purpose-Repair, Semitrailer-Mounted
MIL-S-45551 - Shop Equipment, Cbr Repair, Field Maintenance, Supplemental, E10R1
MIL-S-45552 - Shop Equipment, Cbr Repair, Field Maintenance, Basic, E12
MIL-S-45834 - Spray Outfit, Paint, Portable, Power Driven, Cart Mounted With Compressor (Use Mil-S-15297)
MIL-S-45855 - Shop Equipment, Contact Maintenance, Truck Mounted
This specification covers three types of truck-mounted, contact maintenance shops.
MIL-S-49442 - Shop Equipment, Battery Servicing, Shelter Mounted An/Tsm-133
MIL-S-4953 - Spray Outfit, Corrosion Preventive Compound And Engine Pre-Oiler, Trailer Mounted, Type Ma-2
MIL-S-52330 - Shop Equipment, Electrical Repair, Semitrailer Mounted
This specification covers a mobile, semitrailer-mounted electrical repair shop.
MIL-S-52377 - Shop Equipment, Electronic Repair, Semitrailer Mounted
This specification covers mobile, semitrailer-mounted electronic repair shop.
MIL-S-55257 - Shop, Electronic, Shelter Mounted An/Asm-146( ) And An/Asm-147( )
This specification covers the following: Shop, Electronic, Shelter Mounted AN/ASM-146( )hereinafter referred to as an Electronic Shop.
MIL-S-55316 - Shelter, Electrical, Equipment S-487()1Tsm-55(V)
MIL-S-55562 - Shop, Electronic, Semitrailer Mounted An/Arm-189( ) And An/Asm-190( )
This specification covers the modification of Semi-Trailers, Vans, Electronic, M373A2 and the installation of the applicable equipment and ancillary items into the modified vans to form Electronic Shops, Semi-Trailer Mounted, AN/ASM-189( ) and AN/ASM-190 ( ). (See 6.5)
MIL-S-64052 - Spray Gun, Paint, Heavy Duty, Pressure Feed
This specification covers Pressure Feed, Heavy Duty, Paint Spray Gun assemblies, including the gun, cup, gages, regulator and valves, here after referred to as spray gun.
MIL-S-64055 - Shop Equipment, Mechanical Maintenance, Shelter Mounted, Expandable
This specification covers the installation of tools and equipment into a portable, expandable shelter mounted mechanical maintenance repair shop.
MIL-S-81749 - Spray Outfit, Paint, Airless, Hydraulic Pressure, Portable
MIL-S-82044 - Spray Outfit, Paint (Airless, Recirculation Type, Electrically Heated)
MIL-T-1241 - Testing Outfits, Boiler-Water (Shipboard Use) (S/S By Mil-W-16642)
MIL-T-13132 - Tank, Cold Dip Preservative And Solvent
This specification covers a sheet-steel tank for use in cold preservative and solvent dipping operations.
MIL-T-17370 - Tube And Flue Cleaner, Boiler, Internal, Air Motor Driven (S/S By A-A-59192)
MIL-T-18077 - Tension Device, Coil Winding
MIL-T-19203 - Test Set, Radio An/Arm-22(*) (S/S By Mil-T-81580)
MIL-T-19205 - Test Set, Indicator An/Arm-31 (S/S By Mil-T-81988)
MIL-T-19250 - Test Set, Radio An/Arm-26
MIL-T-19251 - Test Bench Cable Set, An/Arm-29
MIL-T-19432 - Test Set, Magnetic Detector An/Asm-6
MIL-T-21390 - Test Harness, Radar Set, An/Apm-95A
MIL-T-21554 - Test Harness, Transmitting Set An/Urm-111A
MIL-T-22163 - Test Harness, Radio Set An/Arm-38
MIL-T-22303 - Test Bench Cable Set, An/Arm-9
MIL-T-22508 - Test Harness, Indicator An/Aqm-6
MIL-T-22530 - Test Harness, Fire Control System An/Awm-5
MIL-T-22566 - Test Harness, Radar An/Apm-101
MIL-T-22584 - Test Harness An/Awm-11 (*)
MIL-T-22934 - Test Bench Cable Set An/Asm-28(*)
MIL-T-22951 - Test Harness, Radio Set An/Arm-46(*)
MIL-T-22990 - Test Bench Harness For Receiving Set, Radio An/Arr-40
MIL-T-23006 - Test Harness, Radio Receiving Set An/Arm-44(*)
MIL-T-23164 - Test Harness, Automatic Pilot System, An/Asm-50(*)
MIL-T-23693 - Test Harness, Radar Set An/Apm-153(*)
The test equipment covered by this specification shall be for shop use and shall support , position, and electrically provide for interconnection of Radar Set AN/A PN-59 or AN/A PN-59B components, in all system configurations, for bench checking purposes.
MIL-T-23829 - Test Set, Guided Missile Launcher, An/Asm-20
MIL-T-25456 - Tester, Hose Assemblies, Hydraulic, Pneumatic, Hydrocarbon Fuel And Oil, Aircraft And Missile (S/S By A-A-52687)
MIL-T-26477 - Trailer Maintenance A-M32M&6
MIL-T-26478 - Trailer, Maintenance A-M32M&7
MIL-T-26481 - Trailer, Maintenance, Work Bench, Specialist, General Requirements For
MIL-T-2684 - Tube And Flue Cleaner, Boiler, Internal, Electric Motor Driven (S/S By Mil-T-17370)
MIL-T-45025 - Tank, Feed, Finishing Material (5 Gal. Cap.) (Use Rr-C-550)
MIL-T-45032 - Tank, Mixing, Corrosive-Material, Wood, Lead-Lined
MIL-T-45169 - Tank, Pressure, Air, Portable
This specification covers a portable air pressure tank for the retention, conveyance, and dispensing of compressed air.
MIL-T-45553 - Tool Kit, Cbr Equipment, Maintenance And Repair, E11
MIL-T-45560 - Tank, Mixing, Corrosive Material
MIL-T-52914 - Tool Outfit, Hydraulic Systems Test And Repair, Mobile
This specification covers a trailer mounted hydraulic system test and repair tool outfit.
MIL-T-81096 - Test Bench Harness An/Arm-84(*)
MIL-T-81181 - Test Bench Harness, Junction Box Mx-6253(*)/Apn-152(V)
MIL-T-81409 - Test Harness, Direction Finder Set An/Alm-28(*)
MIL-T-81439 - Test Bench Harness An/Arm-74*
MIL-T-81580 - Test Set, Tacan, An/Arm-(*) (S/S By Mil-T-81943)
MIL-T-81759 - Test Harness, Radar, An/Apm-293A
MIL-T-87971 - Tester, Hose Assemblies; Hydraulic, Aircraft And Missile (S/S By Mil-T-25456)
MIL-U-17148 - Undercutter, Armature Mica, Electrically Operated
MIL-U-45995 - Undercutter,Armature Mica, Electrically Operated
MIL-V-10939 - Vulcanizing Equipment Te-55-A, Packaging And Packing Of
MIL-V-52392 - Vulcanizer Kit, Cable Repair
MIL-V-9919 - Vulcanizer Kit, Electrical Cables, Bench Mounted And Portable, Electrically Heated
MIL-W-22374 - Winding Machine, Coil, Bench, Motor Driven
MIL-W-23876 - Winding Machine, Coil, Armature And Stator, Heavy Duty (Use Mil-W-554)
MIL-W-24753 - Washer, High Pressure, Diesel Powered
This specification covers the requirements for a portable, high pressure (2,800 to 3,000 pounds per square inch (lb/in2), hot and cold, fresh water washer system, diesel powered.
MIL-W-24754 - Washer, High Pressure, Electric
MIL-W-554 - Winding Machine, Coil, Armature And Stator Floor Mounted, Motor Driven, Manually Operated
MIL-W-83784 - Washer, Aircraft
NFPA1914 - Testing Fire Department Aerial Devices
This standard shall apply to the examination and testing of all fire apparatus, regardless of year of manufacture, equipped with aerial ladders, elevating platforms, and water towers as specified in the applicable NFPA standards.
OO-B-001146 - Breaker, Flourescent Lamp
OO-P-00780 - Pump, Heavy-Bodied Materials, With Spray Gun
OO-S-00625 - Spray Gun, Paint, (Hand Operated)
OO-S-630 - Spray Outfits, Undercoating, Automotive
This specification covers two types of pumps with spray gun and hose for use in applying motor-vehicle-type undercoating material and other materials of a similar nature.
QPL-15297-12 - Spray Outfit, Paint, Portable
QPL-17148-4 - Undercutters, Armature Mica, Rotary Cutter
QPL-17370-19 - Tube And Flue Cleaner, Boiler, Internal, Air-Motor Driven
QPL-23596-5 - Spray Outfit, Paint, Airless, Cold And Hot Spray, Portable, Non-Electric
QPL-87893-1 - Workstation Electrostatic Discharge (Esd) Control (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
RR-C-550 - Containers, Fluid, For Paint Spray Equipment (S/S By A-A-59564)
This specification covers siphon-feed cups and pressure-feed containers used with paint spray equipment.
RR-P-125 - Parts Cleaning Can, Safety, Bench (S/S By A-A-59211)
This specification covers bench-type safety cans for containing flammable or solvent liquids used in the cleaning or swabbing of small parts.
W-E-00450 - Electronic Equipment, General Specification
XX-C-2866 - Cleaner, Pressure, Hot-Water, Skid-Mounted (S/S By A-A-59618)
This specification covers a portable, skid-mounted, electric, oil fired, hot water pressure cleaner, with a minimum output capacity of 200 gallons per hour (gph) or 760 liters per hour (Lph) at a minimum 1,000 pounds per square inch gage (psig) or 6895 kilopascals (kPa) operating pressure,
XX-C-2867 - Cleaner, Steam Or Hot Water, Pressure Jet Trailer-Mounted, Gasoline Or Diesel Engine
This specification covers trailer-mounted, gasoline or diesel engine drive, oil-fired, 180 gallons per hour (gph) or 680 liters per hour (lph), steam or hot water pressure cleaners equipped with nonsparking cleaning guns.
22 - Clamp, Loop-Aluminum, Plain And Cushioned (S/S By Nasm21322)
MS21333 - Clamp, Loop-Steel-Plain And Cushioned (S/S By Nasm21333)
MS21334 - Clamp, Loop-Double, Cable Or Tube, Steel, Plain And Cushioned (S/S By Nasm21334)
MS21919 - Clamp, Loop Type, Cushioned, Support
MS24373 - Caster, Rigid And Swivel, Precision Pneumatic Tired (S/S By Nasm24373)
MS24374 - Caster, Rigid And Swivel, Precision, Spring Mounted (S/S By Nasm24374)
MS24380 - Caster, Industrial (S/S By A-A-55617, A-A-55618, A-A-55619)
MS24535 - Fastener-Container Closure
MS24563 - Coupling Flanges, V-Band, Profile Dimensions For (S/S By Sae-As24563)
MS25281 - Clamp, Loop, Plastic, Wire Support (S/S By Sae-As25281)
MS26509 - Mount, Resilient, Cup Type, Specific Load, Class 1
MS26510 - Mount, Resilient, Cup Type, Specific Load, Class 2
MS26511 - Mount, Resilient, Cup Type, Two To One Load Range, Class 1
MS26512 - Mount, Resilient, Cup Type, Two To One Load Range, Class 2
MS26513 - Mount, Resilient, Plate Type
MS27114 - Coupling, Clamp, Grooved, V Band, 1.750 To 14.250 Flange Od, (Minus 65 Deg. To Plus 800 Deg. F) (S/S By Mil-Dtl-27536/1)
MS27115 - Coupling, Clamp, Grooved, V Band, 1.750 To 6.250 Flange Od (Minus 450 Deg. To Plus 200 Deg. F) (S/S By Mil-Dtl-27536/2)
MS27116 - Coupling, Clamp, Grooved, V Band, 1.750 To 14.250 Flange Od (Minus 320 Deg. To Plus 1500 Deg. F) (S/S By Mil-Dtl-27536/3)
MS27117 - Coupling, Clamp, Grooved, V Band, 14.250 To 24.250 Flange Od, (Minus 320 Deg. To Plus 1500 Deg. F)
MS27118 - Coupling, Clamp, Grooved, V Band, 24.250 To 40.250 Flange Od (Minus 320 Deg. To Plus 1500 Deg. F)
MS27120 - Clevis, Rod Eng&Turnbuckle (General Purpose) (S/S By Nasm27120)
MS27149 - Casters, Rigid And Swivel, Precision, Heavy Duty
MS27281 - Caster, Rigid And Swivel, Precision, Spring Mounted, Pneumatic Tired
MS27405 - Clamp - Tube
MS27417 - Cap - Propeller Shaft Thread, Shipping
MS27601 - Fastener, Self Locking, Case Mounting, Electronic Equipment (With Holding Clamp) (S/S By Ms14109)
MS27954 - Turnbuckle, Body (General Purpose) (S/S By Nasm27954)
MS27956 - Hinge, Butt, Narrow And Broad, Template, Steel
MS27957 - Hinge, Butt-Narrow And Broad, Template, Hardware, Builder S, Commercial, Aluminum Se Mil-H-1237(
MS27958 - Hinge, Butt, Narrow And Broad, Template, Brass
MS27959 - Hinge, Butt-Narrow And Broad, Without Holes Hardware, Builder S, Commercial, Aluminum (Use Mil-H-1237)
MS27960 - Hinge, Butt, Narrow Light, Non-Template
MS27961 - Hinge, Butt, Broad, Non-Template (S/S By Bhma-A156.1)
MS27962 - Hinge, Butt, Spring, Screen Door, Adjustable (S/S By Bhma-A156.17)
MS27963 - Hinge, Butt, Spring Single Acting, And Double Acting, Adjustable (S/S By Bhma-A156.17)
MS27964 - Hinge, Strap, Cabinet
MS27965 - Hasp, Hinged, Safety, With Swivel Staple, Steel (S/S By Bhma-A156.20)
MS27966 - Hinge, Butt-Narrow, Non-Template (S/S By A-A-55586)
MS27967 - Hasp, Hinged&Safety, With Fixed Staple, Hardware, Builder,S, Miscellaneous, Steel
MS27968 - Hinge, Butt, Broad, Non-Template (S/S By A-A-55587)
MS27969 - Hasp, Hinged, Open With Fixed Staple, Steel (S/S By Bhma-A156.20)
MS27970 - Hinge, Tee (S/S By Bhma-A156.20)
MS27971 - Hasp, Hinged, Double Safety, With Fixed Staple, Steel (S/S By Bhma-A156.20)
MS27972 - Hinge-Strap (S/S By Bhma-A156.20)
MS27973 - Hinge, Strap (Offset) (S/S By A-A-55588)
MS27974 - Turnbuckle, General Purpose
MS27975 - Clevis, Rod End-Adjusting, Wide And Narrow Forks (S/S By Nasm27975)
MS27976 - Clevis, Rod End-Plain, Wide And Narrow Forks (S/S By Nasm27976)
MS27990 - Pin, Straight, Hinge, Piano (S/S By A-A-55589, A-A-55590, A-A-55592, A-A-55594, And A-A-55596)
MS28042 - Clamp, Instrument Mounting, Aircraft (S/S By Nasm28042)
MS33591 - Turnbuckle, Lock Wiring Of
MS33633 - Inserts, Screw Threaded, Design And Usage Limitation For (See Mil-Std 1515
MS33646 - Insert, Screw Threads, Helical Coil, Assembly And Hole, Dimensions For (Use Ms33537)
MS3395 - Mount, Adapter Mt-3730/Asq(No S/S Document)
MS35140 - Strap, Retaining, One Hole, For Pipe, Rigid Conduit And Cable (S/S By Nasm35140)
MS35143 - Spring, Helical
MS35146 - Toggle, Hand Lever, Grease Gun (15 And 21-Oz)
MS35254 - Brace, Corner, Box 3 Quarter-Round Flanges, 3 Mounting Holes
MS35255 - Brack, Corner, Box, Large, 1 Quarter-Round And 2 Cut Flanges, 3 Mounting Holes
MS35256 - Brace, Corner, Box, Small, 1 Quarter Round And 2 Cut Flanges, 3 Mounting Holes
MS35257 - Brace, Corner, Box, Large, 2 Quarter-Ellipse Flanges, 2 Mounting Holes
MS35258 - Brace, Corner, Box, Small, 2 Quarter-Ellipse Flanges, 2 Mounting Holes
MS35259 - Brace, Corner, Box, 3 Quarter-Round Flanges, 6 Mounting Holes
MS35260 - Brace, Corner, Box, 1 Quarter-Round And 2 Cut Flanges, 4 Mounting Holes
MS35261 - Brace, Corner, Box, 2 Quarter-Ellipse Flanges, 4 Mounting Holes
MS35647 - Padlocks, Key Operated (S/S By A-A-59487)
MS35648 - Plug, Expansion: Plain (S/S By A-A-52420)
MS35791 - Handle, Bail, Chest, Surface Mounting, Countersunk Holes (S/S By Nasm 35791)
MS35792 - Handle, Bail, Chest, Recessed (S/S By Nasm35792)
MS35793 - Handle, Bail, Chest, Surface Mounting, Plain Holes (S/S By Nasm35793)
MS35812 - Clevis, Rod End-Adjustable And Plain, Steel (S/S By Nasm35812)
MS35813 - Connector, Rod End - Steel
MS35821 - Hinge, Butt, Continuous (Piano) .032 Thickness, .063 Pin Dia (S/S By A-A-55589)
MS35822 - Hinge, Butt, Continuous (Piano) .040 Thickness .091 Pin Dia (S/S By A-A-55590)
MS35823 - Hinge, Butt, Continuous (Piano) .050 Thickness, .125 Pin Dia (S/S By A-A-55591)
MS35824 - Hinge, Continuous (Piano) .050 Thickness, .187 Dia.
MS35825 - Hinge, Butt, Continuous (Piano) .060 Thickness, .125 Pin Dia
MS35826 - Hinge, Butt, Continuous (Piano) .060 Thickness, .187 Pin Dia (S/S By A-A-55593)
MS35827 - Hinge, Continuous (Piano) .060 Thickness, .250 Pin Dia.
MS35828 - Hinge, Continuous, (Piano) 0.60 Thickness .312 And .375 Pin Dia
MS35829 - Hinge, Butt, Continuous (Piano) .075 Thickness, .187 & .250 Pin Dia (S/S By A-A-55594)
MS35830 - Hinge, Butt, Continuous (Piano) .090 Thickness .250, & .375 Pin Dia (S/S By A-A-55595)
MS35831 - Hinge, Butt, Continuous, (Piano) .125 Thickness, .375 Pin Dia (S/S By A-A-55596)
MS39014 - Clamp, Loop
MS39056 - Bushing, Sleeve, Cable Adapter, Flanged (S/S By Ms3420)
MS39085 - Bracket, Angle, Cable Clamp Support
MS39087 - Handle, Bow (S/S By Nasm39087)
MS51550 - Buckle, Clamp Style, One Piece With Tongue
MS51561 - Turnbuckle, Round Body, Eye And Eye (Type I, Form 1, Class 4) (S/S By Astm-F1145)
MS51562 - Turnbuckle, Round Body, Jaw And Jaw (Type I, Form 1, Class 7) (S/S By Astm-F1145)
MS51563 - Turnbuckle, Round Body, Jaw And Eye (Type I, Form 1, Class 8) (S/S By Astm-F1145)
MS51564 - Turnbuckle, Round Body, Hook And Hook (Type I, Form 1, Class 5) (S/S By Astm-F1145)
MS51565 - Turnbuckle, Round Body, Hook And Eye (Type I, Form 1, Class 6) (S/S By Astm-F1145)
MS51566 - Turnbuckle, Spread Body, Jaw And Jaw (Type I, Form 2, Class 7) (S/S By Astm-F1145)
MS51567 - Turnbuckle, Spread Body, Eye And Eye (Type I, Form 2, Class 4) (S/S By Astm-F1145)
MS51568 - Turnbuckle, Spread Body, Hook And Eye (Type I, Form 2, Class 6) (S/S By Astm-F1145)
MS51569 - Turnbuckle, Spread Body, Jaw And Eye (Type I, Form 2, Class 8) (S/S By Astm-F1145)
MS51570 - Turnbuckle, Pipe, Body, Eye And Eye (Type Ii, Class 4) (S/S By Astm-F1145)
MS51571 - Turnbuckle, Flat Body, Eye And Eye (Type I, Form 3, Class 4) (S/S By Astm-F1145)
MS51572 - Turnbuckle, Flat Body, Jaw And Eye (Type I, Form 1, Class 8) (S/S By Astm-F1145)
MS51573 - Turnbuckle, Flat Body, Hook And Eye (Type I, Form 1, Class 6) (S/S By Astm-F1145)
MS51574 - Turnbuckle, Flat Body, Jaw And Jaw (Type I, Form 2, Class 7) (S/S By Astm-F1145)
MS51828 - Snaphook, Fixed Loop (Use Mil-S-43770)
MS51926 - Clip, End, Strap Type I, Class 1 And Class 2
MS51927 - Buckle, Tongueless, I-Bar
MS51928 - Clip, Spring Tension
MS51929 - Buckle, Spring Action (S/S By Nasm51929)
MS51930 - Pad Eye Welding
MS51938 - Seal, Metallic, Lead And Wire (S/S By Ff-S-2738)
MS51939 - Loop, Strap Fastener (Footman'S Loop) (S/S By Nasm51939)
MS51940 - Loop, Slide (For Equipage) (S/S By A-A-55620)
MS51944 - Buckle, Tongueless, 2-Bar
MS51956 - Strap, Retaining, One Hole, For Thin Wall Conduit (Emt) (S/S By Nasm51956)
MS52150 - Clamp, Loop, Muffler (S/S By A-A-52406)
MS63043 - Rod End, Threaded-Linkage, Rigid (S/S By A-A-52493)
MS63044 - Strap, Retaining, Rectangular, Cushioned (S/S By Nas-1711)
MS70099 - Snap Hook, Quick Release (S/S By Ps70099)
MS70101 - Adapter, Reversible, Quick Fit, 500 Lbs 1-3/4 Inch (S/S By Ps70101)
MS70109 - Clip, End, Strap Type Ii, Class 1
MS70110 - Clip, Spring Tension, Drawcord
MS70111 - Snaphooks, Side Retaining (Use Mil-S-43770)
MS87968 - Casters, Rigid And Swivel Industrial Duty
MS9012 - Ring-Retaining External, Beryllium Copper (S/S By Ms16624)
MS9013 - Ring-Retaining, External, Steel (Asg) (S/S By Ms16624)
MS9014 - Ring Retaining, Internal, Steel (Asg)
MS9017 - Bushing - Screw, Slotted
MS9024 - Clamp, Loop-Cushioned, Joggled, .204 Hole (S/S By Nas1715)
MS9025 - Clamp - Loop Type Support (Heat Resistant) .265 Hole
MS90297 - Buckle, Parachute Container
MS90376 - Cap, Dust, Plastic, Electric Connector (See Notice 2 For Replacement Information)
MS9071 - Boss, 18-1.50 Mm Spark Plug Thread Helical Insert, Standard Dimensions For. (Asg)
MS9101 - Bracket, Angle, 90 Deg. .190 Bolt
MS9102 - Bracket, Angle, 90 Deg. .190 X .250 Bolt
MS9103 - Bracket, Angle, 90 Deg. .190 X .312 Bolt (S/S By Ms9594)
MS9104 - Bracket, Angle, .0 Deg. .190 X 375 Bolt
MS91406 - Mounts, Vibration, Beam-Type, Classes A & B, Coarse Thread (For Use With Electronic Equipment In Aircraft) (S/S By Ms91405 Or Ms91527)
MS91427 - Resistors, Variable (Wirewound, Power-Type) Style Rp10, 25 Watts (Use Mil-R-22/3)
MS91526 - Mounts, Vibration, Beam-Type, Classes A And B (For Use With Electronic Equipment In Aircraft) (S/S By Ms91405 Or Ms91527)
MS91527 - Mount, Vibration, Cup-Type, Classes A-B (For Use With Electronic Equipment In Aircraft)
MS9165 - Bracket-90 Deg. Angle, Ams 6350, .190 Bolt
MS9166 - Bracket-90 Deg. Angle, Ams 6350, .190 X .250 Bolt
MS9167 - Bracket-90 Deg. Angle, Ams 6350, .190 X .312 Bolt
MS9168 - Bracket-90 Deg. Angle, Ams 6350, ,190 X .375 Bolt
MS9176 - Plug, Expansion - Tapered, Ams 5040
MS9228 - Bracket, Angle, 90 Deg, 0.190 Bolt (S/S By Sae-As9228)
MS9229 - Bracket-90 Deg. Angle, Ams 5504, .190 X .250 Bolt
MS9230 - Bracket, Angle, 90 Deg. .190 X 312 Bolt (S/S By Sae-As9230)
MS9231 - Bracket, Angle, 90 Deg. .190 X 375 Bolt (S/S By Sae-As9231)
MS9349 - Clamp, Loop, Cushioned, Joggled, Cres, 0.204 Hole (S/S By Sae-As9349)
MS9350 - Clamp, Loop, Cushioned, Joggled, Cres, .265 Hole (S/S By Nas1715)
MS9351 - Clamp, Loop-Cushioned, Joggled, Aluminum, .204 Hole (S/S By Nas1715)
MS9352 - Clamp, Loop-Cushioned, Joggled, Aluminum, .265 Hole (S/S By Nas1715)
MS9353 - Clamp, Loop-Aluminum, .204 Hole (S/S By Sae-As9353)
MS9354 - Clamp, Loop-Aluminum, .265 Hole (S/S By Sae-As9354)
MS9365 - Bracket-Flat, Cres Ams 5510, .190 Bolt
MS9366 - Bracket-Flat, Cres Ams 5510, .190 X .250 Bolt (Use Ms9552)
MS9367 - Bracket-Flat, Cres Ams 5510, .250 Bolt
MS9379 - Plug, Expansion - Ams 5510 (S/S By Sae-As9379)
MS9380 - Plug, Expansion-Ams 4003 (S/S By Sae-As9380)
MS9391 - Clamp, Loop-Multiple Tube, Detachable Cushion, Ams 5510 (S/S By Sae-As9391)
MS9392 - Cushion, Loop Clamp - Multiple, 3-Tube, Ams 3303 (S/S By Sae-As9392)
MS9393 - Cushion, Loop Clamp - Multiple, 2-Tube, Ams 3303 (S/S By Sae-As9393)
MS9394 - Strap, Retaining-Multiple Tube, Detachable Cushion, Ams 5510 (S/S By Sae-As9394)
MS9395 - Backplate, Retaining Strap Ams 5510 (S/S By Sae-As9395)
MS9514 - Cushion, Loop Clamp-Multiple, 3-Tube, Ams3839
MS9515 - Cushion, Loop Clamp - Multiple, 2-Tube, Ams3839
MS9551 - Bracket, Flat, Steel, Ams 6350, Cad. Plate (S/S By Sae-As9551)
MS9552 - Plate, Mending (S/S By Sae-As9552)
MS9592 - Bracket, Angle, 90 Deg., Cres, .190 Bolt (S/S By Sae-As9592)
MS9593 - Bracket, Angle, 90 Deg. Cres Ams 5510, .190 X .250 Bolt (S/S By Sae-As9593)
MS9594 - Bracket, Angle, 90 Deg., Cres, .190 X .312 Bolt (S/S By Sae-As9594)
MS9595 - Bracket, Angle, 90 Deg., Cres, .190 X .375 Bolt (S/S By Sae-As9595)
MS9596 - Bracket, Angle, 90 Deg. Steel .190 Bolt (S/S By Sae-As9596)
MS9597 - Bracket, Angle, 90 Deg., Cadmium Plated .190 X .250 Bolt (S/S By Sae-As9597)
MS9598 - Bracket, Angle, 90 Deg., Cadmium Plated, .190 X .312 Bolt (S/S By Sae-As9598)
MS9599 - Bracket, Angle, 90 Deg., Cadmium Plated .190 X .375 Bolt (S/S By Sae-As9599)
MS9600 - Bracket, Angle, 90 Deg., Cres, .190 Bolt (S/S By Sae-As9600)
MS9601 - Bracket, Angle, 90 Deg, Cres, .190 X .250 Bolt (S/S By Sae-As9601)
MS9602 - Bracket, Angle, 90 Deg., Cres .190 X .312 Bolt (S/S By Sae-As9602)
MS9603 - Bracket, Angle, 90 Deg., Cres .190 X .375 Bolt (S/S By Sae-As9603)
MS9825 - Clamp, Loop Cushioned, Joggled, Corrosion Resisting Steel, .204 Hole (S/S By Nas1715)
MS9826 - Clamp, Loop-Cushioned, Joggled, Corrosion Resistant Steel, .265 Hole
MSS-SP58 - Pipe Hangers And Supports - Materials, Design And Manufacture
This standard establishes the material, design, fabrication and inspection criteria to be used in the manufacture of standard types of pipe hanger components.
MSS-SP69 - Pipe Hangers And Supports - Selection And Application (S/S By Mss-Sp58)
This standard presents the recommended practice for the selection and application of pipe hangers and supports for all service temperatures.
MSS-SP89 - Pipe Hangers And Supports - Fabrication And Installation Practices (S/S By Mss-Sp58)
This Standard Practice establishes, recommended procedures for the detailing, fabrication and installation of pipe hangers and supports.
NA0119ANDNA0120 - Bracket, 90 Degree Angle, 2-Bolt Attach, Metric
NA0121ANDNA0122 - Bracket, 90 Degree Angle, 2-Rivet Attach, Metric
NA0145 - Insert, Screw Thread, Key Locked, Installation And Removal Procedure, Metric
NA0146 - Insert, Screw Thread, Key Locked, Alloy Steel, Miniature, Metric
NA0147 - Insert, Screw Thread, Key Locked, A-286, Corrosion Resisting Steel, Miniature, Metric
NA0148 - Insert, Screw Thread, Key Locked, Alloy Steel, Lightweight, Metric
NA0149 - Insert, Screw Thread, Key Locked, A-286, Corrosion Resisting Steel, Lightweight, Metric
NA0150 - Insert, Screw Thread, Key Locked, Alloy Steel, Heavy Duty, Metric
NA0151 - Insert, Screw Thread Key Locked, A-286 Corrosion Resisting Steel, Heavy Duty, Metric
NA0157ANDNA0158 - Pin, Quick Release, Self-Retaining, Positive Locking, Single Acting, "T" Handle, Metric
NA0161 - Pin, Quick Release, Positive Locking Single Acting, Metric
NA0165 - Post, Electrical-Mechanical Equipment, Swage Type, Metric
NA0166ANDNA0167 - Insert, Molded-In. Csk Clearance Hole, Sandwich Panel, Al Alloy And Cres, Metric
NA0201THRUNA0204 - Post, Electrical-Mechanical Equipment, Stud Type, Metric
NA0211THRUNA0213 - Post, Electrical-Mechanical Equipment, Swage Type, Metric
NA0241 - Insert, Sandwich Panel, Molded In, Blind Threaded, Self-Locking, Cres, Lightweight, Metric
NA0242 - Insert, Sandwich Panel, Molded In, Thru Threaded, Self-Locking, Cres, Metric
NA0243 - Insert, Sandwich Panel, Molded In, Blind Threaded, Self-Locking, Cres, Metric
NA0244 - Insert, Sandwich Panel, Molded In, Blind Threaded, Self-Locking, Alum/Steel, Floating, Metric
NA0245 - Insert, Sandwich Panel, Molded In, Blind Threaded, Self-Locking, Cres/Cres, Floating, Metric
NA221THRUNA224 - Post, Electrical-Mechanical Equipment, Internal Thread Type, Metric
NAS1047 - Turnbuckle Assembly, Forged Carbon Steel, Jaw And Jaw (For Ground Support Equipment)
NAS1129 - Threaded, Self-Clinching, Standoff
NAS1130 - Coil, Helical, Insert, Screw Thread, Free Running And Self Locking, Tangless
NAS1211 - Fitting, Tie Down Strap End
NAS1212 - Strap Assembly - Tie Down
NAS1213 - Strap Assembly - Tie Down Buckle
NAS1281 - Snap Hook
NAS1282 - Hook Snap, Bolt
NAS1284 - Buckle - Web Strap, Light Duty
NAS1285 - Hook, Safety
NAS1328 - Insert, Screw - Threaded Spline
NAS1349 - Caster, Light Duty, Rigid And Swivel
NAS1382 - Fitting, Tie Down Strap End (Light Duty)
NAS1383 - Strap Assembly, Two Part Adjustable
NAS1384 - Strap Assembly, One Part
NAS1385 - Strap Assembly, Loop Type
NAS1397 - Clamp-Loop, Nylon
NAS1463 - Clip, Spring Tension
NAS1464 - Clip, Spring Tension
NAS1637 - Handle, Latching Internal And External Release Components And Assembly
NAS1677 - Strap, Retaining-Cushioned, Rectangular, Two-Piece
NAS170 - Clevis Engine Control Rod, Adjustable
NAS1711 - Strap, Retaining - Cushioned, Rectangular, Open Bottom
NAS1712 - Clamp, Loop-Cushioned, Rectangular
NAS1713 - Clamp, Loop-Cushioned, Center Mounting
NAS1714 - Clamp, Loop-Cushioned, Elongated
NAS1715 - Clamp, Loop-Cushioned
NAS1716 - Clamp, Loop-Cushioned, Saddle
NAS1787 - Clamp, Tube Mounting
NAS1829 - Post, Electrical-Mechanical Equipment, Stud Type
NAS1830 - Post, Electrical-Mechanical Equipment, Swage Type
NAS1831 - Post, Electrical-Mechanical Equipment
NAS1834 - Panel, Sandwich, Insert, Molded In, Csk And Thru Clearance Hole
NAS1873 - Insert, Self-Locking, Thermal, Bonded Honeycomb Panel
NAS399 - Latch, Push Button, Adjustable
NAS451 - Plug Button
NAS5 - Rod End, Threaded, Alloy Steel, Flash Welding Type
NAS5573 - Clamp Assembly - Electronic Equipment
NAS574 - Pin, Rear Mounting - Electronic Equipment
NAS578 - Retainer, Floating Barrel Nut
NAS814 - Cap - Protective, Flared Fitting
NAS815 - Plug - Protective Flared Hose Or Tube Assembly
NAS816 - Cap Or Plug - Protective, Plain Tube Or Hole
NAS817 - Cap - Protective, Flared Fitting
NAS819 - Cap - Protective, Flanged Fitting
NAS947 - Cap-Protective, Beaded Tube Assembly
QPL-15877-20 - Hangers, Pipe (Spring Hangers And Swaybraces, Shipboard Use)
QPL-17508-40 - Mounts, Resilient: Types 6E100, 6E150, 7E450, 6E900, 6E2000, 5E3500, 6E100Bb, 6E150Bb, 7E450Bb, And 6E900Bb (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-17578-14 - Packing Material, Plastic (For Dogs For Watertight Closures) (Symbol 1425) (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-21565-7 - Clamp, Loop, Plastic, Wire Support
QPL-23460-19 - Pin, Quick-Release, Self-Retaining, Positive-Locking
QPL-27536-6 - Coupling, Clamp, Grooved, V-Band
QPL-4751-9 - Caster, Rigid And Swivel, Precision Heavy Duty, And Shock Absorbing
QPL-5432-5 - Insulator, Vibration
QPL-6818-17 - Clamp, Mounting, Aircraft Instruments
QPL-7474-11 - Casters, Industrial
QPL-85052-9 - Clamp, Loop, Cushion, General Specification For (Replaced By The Qualified Products Database (Qpd) See Notice 1 For Additional Information)
QPL-85449-2 - Clamp Assembly, Saddle-Type, Cushion, General Specification For
QPL-85731-6 - Fastner, Positive Locking, Electronic Equipment
QPL-FF-L-2740-10 - Locks, Combination
QPL-FF-P-001480-1 - Padlock, Key Operated (Resistant To Opening By Force Pick, And Bypass Techniques)
QPL-FF-P-110-3 - Padlock, Changeable Combination (Resistant To Opening By Manipulation And Surreptitious Attack)
RR-K-795 - Key Chain, Reel (Door Key And Drill Chuck Keys)
UL325 - Door, Drapery, Gate, Louver, And Window Operators And Systems
These requirements cover electric operators for doors, draperies, gates, louvers, windows and other opening and closing appliances rated 600 volts or less to be employed in ordinary locations in accordance with the National Electrical Code, NFPA 70.
UL437 - Locks, Key
These requirements cover key locks categorized as follows: Cabinet locking cylinders, Door locks, Locking cylinders, Security container key locks, Type 1 and Type 2, and Two-key locks.
W-A-450/2 - Components For Interior Alarm Systems Foil
W-A-450/3 - Components For Interior Alarm System Breakwire
WW-H-171 - Hangers & Supports, Pipe (For Civil Agencies S/S By A-A-1192; For Dod S/S By Mss-Sp-58, Mss-Sp-69, Nfpa11, Nfpa12, Nfpa13, Nfpa14, Nfpa15, Nfpa16 & Nfpa17)
This specification covers pipe hangers, brackets, saddles, clamps, and pipe rolls for all types of piping systems.
ZZ-C-730 - Cups & Glides, Furniture (S/S By A-A-1194 & A-A-1196)
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business