MIL-L-14576F
24 March 1999
SUPERSEDING
MIL-L-145755
5 February 1985
MILITARY SPECIFICATION
LATHE , ARMATURE AND UNDERCUTTER
This specification is approved for use by all Departments
Agencies of the Department of Defense.
1.
SCOPE
1.1 Scope. This specification covers one type of bench mounted lathe designed
for use in commutator turning and mica undercutting of automotive generator and
starter motor armatures.
APPLICABLE DOCUMENTS
2.
2.1 Government documents.
2.1. 1 Specifications and standards. The following specifications and standards
form a part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are-those listed in the issue of the
Department of Defense Index of Specifications and Standards (DoDISS) and
supplement thereto, cited in the-solicitation (see 6.2.1).
SPECIFICATIONS
FEDERAL
- Connector, Plug, Electrical, General Purpose, Genera 1
W-C-596/66
Grade, Grounding, 2 Pole, 3 Wire, 20 Amperes, 250 Volts,
50/60 Hertz.
- Box, Wind, Cleated-Plywood.
PPP-B-601
MILITARY
Crates, Wood; Lumber and Plywood Sheathed, Nailed and
MIL-C-104
-
Bolted.
- Preservation, Methods of.
MIL-P-116
- Treatment, Moisture and Fungus-Resistant, of Communica-
ML-T-152
FSC 4940
AMSC N/A
Approved for public release;
distribution is unlimited.
DISTRIBUTION STATEMENT A.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business