INCH-POUND
MIL-PRF-83756D
28 September 1998
SUPERSEDING
MIL-B-83756C
29 September 1981
PERFORMANCE SPECIFICATION
BLAST CLEANING MACHINES
This specification is approved for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers 2 types of dry blast cleaning machines for surface cleaning, surface
conditioning and peening of ferrous and nonferrous metals using a blasting media.
1.2 Classification. The type machine covered by this specification are of the following types and sizes:
Type I
Type II
Cabinet, Stationary
External hand-held gun (see3.3.2.1)
Size A (see 3.3.1.2)
Size B (see 3.3.1.2)
Size C (see 3.3.1.2)
2.
APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This
section does not include documents in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements documents cited in sections 3 and 4 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those listed in the issue of the Department of Defense Index of Specifications and Standards (DoDISS) and
supplement thereto, cited in the solicitation (see 6.2).
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use
in improving this document should be addressed to: The Resources and Logistics Services Division, SA-
ALC/TILDD, 485 Quentin Roosevelt Rd., Bldg 171, Post A-16, Kelly AFB, TX 78241-6524 by using the
Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document
or by letter
AMSC N/A
FSC 4940
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business