A-A-50310A
Round Pattern Elliptical Pattern
FIGURE 1. Acceptable spray patterns.
3.5 Impact resistance. The spray gun, with the cup removed (the type S gun shall also have the siphon tube assembly removed) and the nozzle and connections protected, shall withstand being dropped 6 times through a free fall of 6 feet (minimum) to an unprotected concrete floor. There shall be no damage or deformation to the spray gun sufficient to degrade its performance.
3.6 Carrying case. The carrying case shall be made of high-density polyethylene plastic that meets the requirements of ASTM D4976 designation PE235. The carrying case shall be molded with custom contours to accommodate the spray gun, cup, and all hardware necessary for conversion from one size or type to the other. The carrying case shall consist of the top and bottom shells, handle, and clasps.
3.7 Marking. The spray guns supplied to this CID shall be marked with the manufacturer's (MFR's) standard commercial PIN.
3.8 Metric products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, provided they are within specified tolerances after conversion using tables in the latest revision of FED-STD-376, and all other requirements of this CID are met.
3.6 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or environmentally preferable materials should be used to the maximum extent possible provided that the material meets or exceeds the operational and maintenance requirements, and promotes economically advantageous life cycle costs.
3.7 Workmanship. Coupling halves, cap and wye; quick disconnect pneumatic hose, two-lug universal type shall be processed in such a manner as to be uniform in quality and shall be free from other defects that will affect life, serviceability, or appearance.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business