A-A-50310 Spray Gun, Paint, Heavy Duty Siphon Or Pressure FeedThis commercial item description CID covers the general requirements for two types siphon and pressure feed of air operated, heavy-duty paint spray guns consisting of forged aluminum bodies, paint cups, and carrying cases. Spray guns covered by this CID are intended for commercial/industrial applications.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8

A-A-50310A

Other Publications: ASTM INTERNATIONAL

ASTM D4976              -      Standard Specification for Polyethylene Plastics Molding and

Extrusion Materials

(Copies of these documents are available online at https://www.astm.org or from the ASTM International, P.O. Box

C700, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.)

7.5  Ordering data.  The contract or order should specify the following:

a.  CID document number, revision, and CID PIN. b.  Product conformance provisions.

c.  Packaging requirements.

7.6  Commercial products.  As part of the market analysis and research effort, this CID was coordinated with the following manufacturers of commercial products.  At the time of CID preparation and coordination, these manufacturers were known to have commercial products that would meet the requirements of this CID.

(NOTE:  This information should not be considered as a list of approved manufacturers or be used to restrict

procurement to only those shown.)

MFR's CAGE                                    MFR's name and address

5S985                                               Fluid-Air Products, Inc.

12834 Gravois Rd.

Saint Louis, MO  63127-1713

Voice telephone: (314) 729-7000

07334                                                ITW Industrial Finishing

DBA Binks DeVilbiss

195 Internationale Blvd. Glendale Heights, IL 60139

Voice telephone: (630) 237-5000

7.7  Part number (P/N) supersession data.  These CID PINS supersede the following MFRs' P/Ns as shown in table

II.  This information is being provided to assist in reducing proliferation in the Government inventory system.

TABLE II.  P/N supersession data.

1/  The manufacturer's P/N shall not be used for procurement to the requirements of this CID.  At the

time of preparation of this CID, the aforementioned commercial products were reviewed and could be replaced by the CID PIN shown.  For actual part marking requirements see 3.7.

7