MIL-S-4953C(USAF)
3.25.2.3 Aluminum-alloy surfaces not subjected to excessive heat shall be anodized in
accordance with MIL-A-8625. Exterior aluminum alloy sheets within the cabinet shall be primed in accordance with MIL-P-8585 and given two or more coats of enamel conforming to TT-E-
529, color Number 13538 of FED-STD-595.
3.25.2.4 Piping and fittings. All piping and fittings shall be of corrosion-resistant material or the exterior surfaces treated to resist corrosion.
3.26 Instruction panel. The spray outfit shall have an operating instruction panel impervious to oil and grease or weather, mounted on the inside of the spray outfit, and shall include the following information:
a. Operating and maintenance instructions, including detailed instructions for obtaining the proper percentage of corrosion compound.
b. Detail instructions for delivering the preoiling fluid. c. Instructions for setting the timer.
d. Instructions for locking out the timer and delivering any amount of preoiling fluid. e. An electrical diagram.
f. A lubrication diagram.
g. Procedures in the event of operating failure.
h. Identify pressure regulating valve and reference relationship to spray gun relief valve.
3.26.1 All controls shall be permanently and legibly marked as to identity and functions.
3.27 Identification of product. Equipment, assemblies, and parts shall be marked for identification in accordance with MIL-STD-130.
3.28 Workmanship.
3.28.1 General. The spray outfit, including all parts and accessories shall be constructed and finished in a thoroughly workmanlike manner. Particular attention shall be given to neatness and thoroughness of soldering, wiring, marking of parts and assemblies, welding and brazing, painting, riveting, machine screw assemblies, and freedom of parts from burrs and sharp edges.
3.28.2 Dimensions. Dimensions and tolerances not specified, shall be as close as is consistent with best shop practices. When dimensions and tolerances may affect the interchangeability, operation, or performance of the spray outfit, they shall be held or limited accordingly.
14
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business