MIL-S-4953C(USAF)
5.1.1.3 Spray gun. The spray gun shall be preserved with type P-10 preservative in accordance with MIL-P-116, Method I. The preserved spray gun shall be packaged in a fiberboard box conforming to PPP-B-636, grade V3C. Closure shall be in accordance with the appendix of PPP- B-636. The packaged spray gun shall be placed in the storage cabinet.
5.1.1.4 Internal surfaces. All internal surfaces of the main and auxiliary tanks, pumps, valves, and lines, subject to corrosion, shall be preserved by flushing with type P-10 preservative in accordance with MIL-P-116.
5.1.1.5 Physical protection. All items secured within the storage compartment of the cabinet housing shall be cushioned in accordance with MIL-STD-1186.
5.1.1.6 Shrouding. Each cabinet inclosure of the spray outfit shall be covered with a shroud conforming to MIL-C-20696, type II, class 2. The shroud shall be provided with adequate tie down facilities.
5.1.2 Level C. The spray outfits shall be preserved and packaged in accordance with the manufacturer's commercial practice.
5.2 Packing. Packing shall be level A, B or C as specified (see 6.2).
5.2.1 Level A, B or C. Each spray outfit preserved and packaged as specified in 5.1.1 or 5.1.2 shall be shipped mobile (uncrated).
5.3 Marking. In addition to any special marking required in the contract or order, the spray outfits shall be marked in accordance with MIL-STD-129.
6. NOTES
6.1 Intended use. The type MA-2 spray outfit is intended for use in conjunction with the storing and preoiling of reciprocating and gas turbine aircraft engines. The spray outfit is intended for use in the application of a predetermined amount of hot corrosion-preventive compound to the internal parts of aircraft engines and for preoiling aircraft engines prior to initial run-in.
6.2 Ordering data. Procurement documents should specify:
a. Title, number, and date of this specification.
b. Level of packaging and packing required (see Section 5 ) .
c. Where the preproduction test samples should be sent, the activity responsible for testing and necessary instruction concerning the submittal of test reports (see 4.4.1 and 4.4.2).
d. Any drawings, instructions, spare parts or other items that should accompany the test samples.
22
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business