MIL-PRF-83756D
4.4.13 Noise test (Type I). The noise level at the operator's position shall be measured using a general sound level
meter, ANS S1.4-1971 (ANSI Type 2) or equivalent. A noise level in excess of 84 db A slow scale shall cause
rejection.
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the contract or order
(see 6.2). When actual packaging of materiel is to be performed by DoD personnel, these personnel need to contact
the responsible packaging activity to ascertain requisite packaging requirements. Packaging requirements are
maintained by the Inventory Control Point's packaging activity within the Military Department or Defense
Agency, or within the Military Department's System Command. Packaging data retrieval is available from the
managing Military Department's or Defense Agency's automated packaging files, CD-ROM products, or by
contacting the responsible packaging activity.
F6. NOTES
(This section contains information of a general or explanatory nature which may be helpful, but is not
mandatory.)
6.1 Intended use. The machines covered by this document are intended for use in cleaning, surface conditioning,
and peening of Aerospace Ground Equipment (AGE) and aircraft components.
6.2 Acquisition requirements. Acquisition documents should specify the following:
a. Title, number and date of this specification.
b. Issue of DoDISS to be cited in the solicitation, and if required, the specific issue of individual documents
referenced (see 2.2.1 and 2.2.2.)
c. When first article is required (see 3.1).
d. Type and size as specified (see 1.2).
e. Packaging requirements (see 5.1).
6.3 Conformance inspection. Affordable conformance inspection with confidence varies depending upon a
number of procurement risk factors. Some of these factors include: contractor past performance, Government
schedules and budget, product material and design maturity, manufacturing capital equipment and processes
applied, the controlled uniformity of those processes, labor skill and training, and the uniformity of measuring
processes and techniques.
6.4 Subject term (key word) listing.
Cabinet
Exhaust
Filter
Gage
Glass shot
Peening
Pressure
Reclaim system
Suction
Work floor
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business