MIL-S-49442 (ER)
3.16.2
Edge rounding, exposed Exposed edges shall be rounded to a minimum
radius of 0.04 inch (1mm), and exposed corners to a mi nimum of 0.5 inch (13mm).
3.16.3
Radioactive Materials. Radioactive materials shall not be used (e.g.
luminous dials/markings, electron tubes, surge arrestors, and lenses).
3.17
Acoustical noise. With the air conditioners operating, the acoustical
noise level at the operator's positions shall not exceed the NC-60 criteria
as specified in MIL-STD-1474. Table 3 Category F,
(See 4.13).
3.18
Technical Literature, tools and running spare parts. Technical literature,
tools and running spare parts shall be furnished as specified in the contract.
3.19
First Article.
When specified, a sample shall be subjected to first
article
inspection.
(See 4.3).
In MIL-P-11268:
a)
General requirements for plastic material and
plastic parts.
Wiring and Cabling include:
Slack
Protection
Clearance
Splicing
Connections, general
Grounding, general
Shielding on wire and cable
Mechanical operation of controls
b)
In MIL-S-49442 (ER)
Wiring
3.10.1
Finish, protective
3.10.2
3.10.3
Marking
3.10.4
Cleaning
3.10.5
Soldering
Welding
3.10.6
Connection, soldered, general
3.10.7
Grounding
3.10.8
3.10.9
Securing of parts, general
3.10.10
Riveting
4.
Quality Assurance Provisions.
Unless otherwise specified in the
Responsibility for inspection.
4.1
contract or purchase order, the contractor is responsible for the performance
Except as otherwise specified
of all inspection requirements as specified herein.
in the contract or purchase order, the contractor may use his own or any other
facilities suitable for the performance of the inspection requirements specified
herein, unless disapproved by the Government. The Government preserves the right
to perform any of the inspections set forth in the specifications where such
inspections are deemed necessary to assure that supplies and conform to pre-
scribed requirements.
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business